Hi,
If you have different IP ranges on the same machine , then you need to
add 3 gateways using linux ip route , then you can make use of
tcp_outgoing_address.
I have it documented here :
http://www.snono-systems.com/files/squid-multiwan.pdf
On Wed, Feb 23, 2011 at 9:50 AM, Senthilkumar
<senthilkumaar2021_at_gmail.com> wrote:
>
> Amos Jeffries wrote:
>>
>> On Wed, 23 Feb 2011 10:41:20 +0530, Senthilkumar wrote:
>>>
>>> Hello All,
>>>
>>> We have a gateway machine which has three upstream isp and to make
>>> clients use the particular isp we use advance routing based on the
>>> source address. �When we run squid �on the same machine to log
>>> websites all traffic passes through the single isp i.e. the isp which
>>> is set as default gateway. We need all the users to pass through squid
>>> and use different isp's as per source route.
>>> Please share your views to achieve it.
>>
>> http://wiki.squid-cache.org/ConfigExamples/Strange/RotatingIPs
>>
>> Amos
>>
> Thank you �very much Amos,
>
> We have clients in 10.X.X and 172.16.1.X and 172.16.2.X series, we need each client series would use single isp for upload and download.
> whether the following configuration achieve it?
>
> acl isp1 src 10.X.X
> acl isp2 src 172.16.1.X
> acl isp3 src 172,16.2.X
>
> acl download method GET HEAD
> acl upload method POST PUT
>
> tcp_outgoing_address <isp1 ip> isp1 download upload
> tcp_outgoing_address <isp2 ip> isp1 download upload
> tcp_outgoing_address <isp3 ip> isp1 download upload
>
> whether by setting tcp_outgoing_address whether upload and download takes place through the source based routed isp or the default gateway isp?
>
> Thank
> Senthil
>
Received on Wed Feb 23 2011 - 11:09:43 MST
This archive was generated by hypermail 2.2.0 : Wed Feb 23 2011 - 12:00:03 MST