Re: [squid-users] How can I get Squid to use more memory?

Hi Amos,

Thanks for the insight. I'll have investigate some of your
suggestions ( like size identification ) further.

We're caching dynamic content ( ASP.Net from IIS ) using Squid 3.1 on
CentOS by the way.

Best regards,
Kervin

On Sun, Oct 30, 2011 at 6:38 PM, Amos Jeffries <squid3_at_treenet.co.nz> wrote:
> On Sun, 30 Oct 2011 11:35:39 -0400, Ralph Lawrence wrote:
>>
>> Hi,
>>
>> How do I get Squid to use all my server memory as a cache and keep as
>> many objects as possible in there?
>
> This is default behaviour.
>
> cache_mem determines the size of in-RAM object cache. As your config says,
> "Feel free to use as much as needed". Limited only that the box must not
> start swapping under peak load. That will kill performance at the worst
> possible time.
>
>>
>> Squid is a great piece of software. �I've been studying it's
>> configuration for the last few days now and I'm really impressed with
>> what I've seen.
>>
>> We have a fairly complex reverse proxy configuration building. �I am
>> now building the first ( of eventually many ) load-balanced Squid
>> servers. �Each Squid reverse proxy has 2GB of ram and *only* runs
>> Squid. �Absolutely nothing else will be on the server. �The actually
>> site being cached is under 1GB in size on disk. �So conceptly Squid
>> should be able to cache the entire site in memory and we should only
>> see TCP_MEM_HIT in logs right?
>
> In theory yes. But... dynamic or static site content?
>
> The difference being that each small dynamic file on the web server disk
> could expand out into a great many variant copies in the cache. Just from
> small URL parameter differences. This could mean adding an few extra zeros
> to the cache size required.
>
> Squid only caches one object per unique URL text value. So the total
> explosion is somewhat smaller than theoretically possible.
>
>>
>> But right now, even under load the user is reporting Squid is using
>> 13MB of memory and we're seeing a lot of TCP_HIT as opposed to
>> TCP_MEM_HIT. �How can we change this?
>
> This sounds to me like it could be a few things. You did not indicate any
> release numbers so some of these may not apply:
>
> �* your squid might be an older one which does not promote disk objects back
> into memory when they get hot/popular again. In those release once an object
> gets less popular it gets sent to the disk cache, and served as HIT from
> there until something causes an update/refresh.
>
> �* the HIT objects might be >2MB big. The configuration below specifies that
> no >2MB object may be stored in memory.
>
> �* the objects may be arriving with no size indications. Squid is forced to
> assume "infinite" size (ie >2MB) and send them to disk immediately. Assuming
> promotion is available in your squid, it is not worth promoting from disk
> until the second request, which shows up as a HIT followed (maybe) by
> MEM_HIT.
>
> �* the objects may simply not be that popular. Stored in memory until newer
> objects push it out, then some time later gets a HIT after its on disk.
> �- which HIT may promote it and the cycle repeats without actually being
> fast enough to be a MEM_HIT.
>
>>
>> My config looks like...
>>
>> # Feel free to use as much as needed
>> cache_mem � � 1200 MB
>
> 2GB of RAM on the box with 1.2 GB dedicated to object storage. Seems about
> right to me. Although only you have access to the RAM usage stats at peak
> traffic times to tweak that further.
>
>>
>> # Keep all the memory used
>> memory_pools �on
>>
>> # Don't let a few files hog memory. �We don't have many large files
>> anyway, but just in case
>> maximum_object_size_in_memory 2048 KB
>>
>> # Replacement policy
>> cache_replacement_policy � � �heap LFUDA
>>
>> Thanks,
>> Ralph
>
> Amos
>
>
Received on Mon Oct 31 2011 - 00:39:10 MDT