On 16.02.12 15:51, Paolo Supino wrote:
>I have the following scenario: I have a subnet that needs to get out
>on the internet to 2 different subnets. To subnet1 it needs to be able
>to access only in HTTP while to subnet2 it needs to be able to access
>only in HTTPS. Is it possible to do the follwoing:
>
>acl source_subnet src 192.168.100.0/255.255.255.0
>acl destination_subnet1 dst 172.16.0.0/255.255.0.0
>acl destination_subnet2 dst 172.31.0.0/255.255.0.0
>acl HTTP_PORT port 80
>acl SSL_PORT port 443
>
>http_access allow source_subnet destination_subnet1 HTTP_PORT
>http_access allow source_subnet destination_subnet2 SSL_PORT
do you have any other http_access directives in the config?
-- Matus UHLAR - fantomas, [email protected] ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. WinError #99999: Out of error messages.Received on Fri Feb 17 2012 - 08:55:16 MST
This archive was generated by hypermail 2.2.0 : Fri Feb 17 2012 - 12:00:03 MST