Re: [squid-users] Squid3.3.5 + Rock Store + wccp2_rebuild_wait

Thanx all, let me file a bug for this

On 11 June 2013 05:35, Amos Jeffries <squid3_at_treenet.co.nz> wrote:
> On 11/06/2013 9:35 a.m., Alex Rousskov wrote:
>>
>> On 06/10/2013 10:44 AM, Philip Munaawa wrote:
>>
>>> I have configured squid with a rock cache_dir & wccp. When I use
>>> wccp2_rebuild_wait on, squid does not send out 'HERE IAM' messages to
>>> the router.
>>>
>>> It appears squid is waiting for the cache_dirs to be rebuilt, however,
>>> this seems to go on and on. Perhaps a signal notifying squid that the
>>> rebuild is completed is not being propagated correctly to the
>>> wccp2HereIam function in wccp2.cc.
>>
>>
>> Does Squid tell you that the rebuild is over. For example, do you see:
>>
>>> 2013/06/10 15:29:19.010| Finished rebuilding storage from disk.
>>
>> in cache.log for each disker kid? If yes, this sounds like a bug to me.
>> Since Rock Store rebuild is done in disker processes, there is probably
>> no code to detect that the rebuild is over in the worker process(es)
>> that handle WCCP.
>>
>> If you cannot fix this yourself, consider filing a bug report; perhaps
>> somebody will.
>>
>> Meanwhile, if everything works OK with wccp2_rebuild_wait off, do not
>> use wccp2_rebuild_wait on.
>
>
> If there is no feedback, how does the worker identify when it can start
> sending lookups to the disker?
> that is the mechanism which the WCCP signal need to be determined by.
>
> Amos
Received on Tue Jun 11 2013 - 07:47:17 MDT