Re: CPU utilization question

if running under linux, check how much RAM linux sees, i know sometimes it
will only see 64Mb unless you tell it to use more in your lilo.conf... add
a line something like
append = "mem = 128M"

that way you might get more ram, and free up the cpu..

Andrew Lowe
andrew@pccentre.com.au
        The South Coast Professional Computing Centre
                + Hislora Website Hosting & Design
                + Daly & Daly Computer Training
                + Flatearth Internet Cafe
        Ph: 02 4423 7771
        Fax: 02 4423 7772
        email: sales@pccentre.com.au

On Thu, 3 Aug 2000, Karn.k wrote:

> I don't know if this help. My squid is on 486/66 machine with 64M RAM. I
> got three IDE disks, one for system and the other two for cache of size
> 1.5GB and 800MB. My average CPU usage is about 30%. It occationally jump
> up to 70%. My squid serve peak load during office hour at about 1.5 request
> per second. Do your sever serve other function than Squid?
> ----- Original Message -----
> From: Nightingale, Don <Don.Nightingale@TheMentorNetwork.com>
> To: <squid-users@ircache.net>
> Sent: Thursday, August 03, 2000 3:27 AM
> Subject: CPU utilization question
>
>
> > I have squid running on a 550Mhz Compaq proliant w/128M of RAM (Linux v2.2
> > kernel), and and 18G raid 5 array. Regardless of the # of active users,
> the
> > process runs at 99% CPU, but at a low priority. Is this normal behavior?
> >
> > It seems to be running fine in any case.
>
Received on Wed Aug 02 2000 - 21:23:36 MDT