Re: [squid-users] Can't get transparent to work with squid and RH7.2

Well i did it with 7.0 and what i did may be i t be
helpfull for u.

Took the ip_wccp.c >>>easy
Compile it to get ip_wccp.o. how ? as ur kernel
compile any module when u cmpile kerneal and comannd
make modules ,so i see the procedure ther what it do
when compiling the any any.c to get any.0

so i did same wiith replacing the ip_wccp.c .it give
me ip_wccp.o in same directory.

then add this module as ever u do and it is working
,it showed some error but its working and i am happy
that its working.

Regards

(i am not eligible to give support coz i m just
learner plz Ask Henrik, Joe or some other experienced
person)

--- Brad Groshok <brad@ody.ca> wrote:
>
> OK, its been at least 10 hours since my last post.
> I've completly confused myself with anything to do
> with how I'm suppose to
> install ip_wccp.
> Have read the squid FAQ (many many times), and am
> getting now-where.
> Keep following links and I can't seem to find a
> plain cut and dry "do this
> to install ip_wccp on a RH7.2 box".
>
> The squid faq says
> "Download the Linux WCCP module and compile it as
> you would any Linux
> network module"
>
> download, fine, easy.
> and seeing how I'm more of a Solaris person I would
> NOT know how to
> compile it as I would on any Linux network module"
>
> Can anybody offer a bit of hand-holding to get me
> through this part.
>
>
>
>
> On Tue, 2 Apr 2002, Squid Support (Henrik Nordstrom)
> wrote:
>
> > See the Squid FAQ on how to install WCCP. You are
> still missing some
> > components (WCCP support in the kernel).
> >
> > Regards
> > Henrik
> >
> >
> > On Monday 01 April 2002 23:50, Brad Groshok wrote:
> > > Hi All:
> > >
> > > Having problems getting transparent proxy to
> work with
> > > Squid 2.5pre4 on a RH7.2 system with wccp
> > >
> > > Think I have squid setup properly
> > > from squid.conf:
> > >
> > > http_port 3128
> > > httpd_accel_host virtual
> > > httpd_accel_port 80
> > > httpd_accel_with_proxy on
> > > httpd_accel_uses_host_header on
> > >
> > > squid will answer if I set IE to port 3128, and
> surf around
> > >
> > > On my cisco I have:
> > >
> > > ip wccp version 1
> > > ip wccp web-cache redirect-list cache
> > >
> > > ip access-list extended cache
> > > deny tcp host 216.240.0.25 any
> > > permit tcp any any eq www
> > >
> > > my fastether port out to our upstream:
> > >
> > > ip wccp web-cache redirect out
> > >
> > > Router sees cache box (from sh ip wccp)
> > >
> > > Global WCCP information:
> > > Router information:
> > > Router Identifier:
> 216.240.0.250
> > > Protocol Version: 1.0
> > >
> > > Service Identifier: web-cache
> > > Number of Cache Engines: 1
> > > Number of routers: 1
> > > Total Packets Redirected:
> 4300
> > > Redirect access-list:
> cache
> > > Total Packets Denied Redirect: 0
> > > Total Packets Unassigned: 0
> > > Group access-list:
> -none-
> > > Total Messages Denied to Group: 0
> > > Total Authentication failures: 0
> > >
> > > On my RH7.2 box: (generic install)
> > > I (think) I have disabled ipchains and enabled
> iptables
> > >
> > > chkconfig --level 2345 ipchains off
> > > chkconfig --level 2345 iptables on
> > > and rebooted
> > >
> > > ran:
> > > iptables -t nat -A PREROUTING -i eth0 -p tcp
> --dport 80 -j REDIRECT
> > > --to-port 3128
> > > to do the port forwarding.
> > >
> > > <disclaimer>
> > > I not a RH guy!
> > > </disclaimer>
> > >
> > >
> > >
> > > With all that done, on my router I see Total
> Packets Redirected
> > > increasing but never see anything in the squid
> access.log.
> > >
> > > Any/all help greatly appreciated.
> >
> > --
> > MARA Systems AB, Giving you basic free Squid
> support
> > Customized solutions, packaged solutions and
> priority support
> > available on request
> >
>

__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://http://taxes.yahoo.com/
Received on Mon Apr 01 2002 - 23:59:24 MST