[squid-users] tcp_outgoing_address problem !

Hi ,

I have a working squid 2.5 Stable 1 that using an internet connection through eth0 card with a default route added to routing table . For some reason I have setup a one way receive only sattelite DVB receiver and I want to use this link for some IP classes . Then I used tcp_outgoing_address . My network plan is like this :

eth0 -> 81.12.18.2 81.12.18.10
|-----------| |----------------------| |-------------------------|
| squid box |-------| Catalyst 2950 switch |------| Broadlogic DVB Receiver |----( Sattelite Dish and LNB Receiver ) <------- 62.112.164.192/255.255.255.192
|-----------| |----------------------| |-------------------------|
eth0:0 -> 62.112.164.193 |
                               |
                    |----------------------|
                    | Cisco 2650 Router | 81.12.18.1
                    |----------------------|
                               |
                               |
                        DSL Connection

As you can see there two different classes the 81.12.18.0/24 is routed through DSL connection from send and receive internet and 62.112.164.192/255.255.255.192 is routed through DSL for sending packets and receiving through DVB Receiver .
So the Squid box have two different IP address that each one from one of these classes . There is a network card the I stored Secondary IP address on the interface . The squid ip address is 81.12.18.2 is DSL class IP address and 62.112.164.193 is DVB class IP address .
I have tried pinging yahoo.com on squid box with this command : ping yahoo.com , and all things well cause sending and receiving is throgh DSL link .
The I tried ping yahoo.com with this command : ping -I 62.112.164.193 yahoo.com , and also all things well cause sending is through DSL link and receiving is through sattelite DVB receiver .
As you can see there is no problem is our DVB connection and network plan . After this I tried to configure squid to use the sattelite connection for some specific address with this configuration :

acl specific_ips src 81.12.18.192/255.255.255.192
tcp_outgoing_address 62.112.164.193 specific_ips
tcp_outgoing_address 81.12.18.2

Also the default route of the squid box is 81.12.18.1 and all sattelite Ips are routed to squid box on Broadlogic .
The problem is that the normal IP addresses ( instead of specific_ips ) is working well through normal DSL connection and IP address and nothing happened to them . But the specific_ips that should use sattelite link is not working and no webpage could browsed .
I tried netstat and it shows that the connection from source 62.112.164.193 to target host is tried to established and added to netstat list . But there is no web browsing ! Any idea ?

--
Regards
    =================================================================
   /  Seyyed Hamid Reza    /        WINDOWS FOR NOW  !!            /
  /  Hashemi Golpayegani  /  Linux for future , FreeBSD for ever  /
 /    Morva System Co.   / ------------------------------------- /
/  Network Administrator/ hamid@morva.net   ,   ICQ# : 42209876 /
================================================================