Re: [squid-users] Starting on boot squid-2.5.STABLE2 with winbind fails

From: Marc Elsen <[email protected]>
Date: Fri, 11 Apr 2003 09:11:55 +0200

Joao Coutinho wrote:
>
> Hi,
> I put a sleep 30 and it worked very fine. Thank you very much.
> best regards Joao
>
 Ok, thx for the feedback,

 M.

> >From: Marc Elsen <marc.elsen@imec.be>
> >To: Joao Coutinho <jocoutinho@hotmail.com>
> >CC: squid-users@squid-cache.org
> >Subject: Re: [squid-users] Starting on boot squid-2.5.STABLE2 with winbind
> >fails
> >Date: Thu, 10 Apr 2003 19:20:47 +0200
> >
> >
> >
> >Joao Coutinho wrote:
> > >
> > > I did what you told me to do. And this is the error message when squid
> >is
> > > starting:
> > >
> > > FATAL: getpwnam failed to find userid for effective user 'squid'
> > > Squid Cache (Version 2.5.STABLE2): Terminated abnormally.
> > > CPU Usage: 0.064 seconds = 0.057 user + 0.008 sys
> > > Maximum Resident Size: 0 KB
> > > Page faults with physical i/o: 245
> > >
> > > This message occurs when I try to start squid without starting winbindd.
> >I
> > > made this test. I killed winbindd and ran squid and the same massage
> >came
> > > up.
> > > If I start winbindd and then start squid, no error occurs. Squid works
> >fine.
> > > So my problem must be Winbind startup delay causes wb_ntlmauth helper to
> > > fail.
> >
> > Most probably, try to find out how much the needed delay is,and put
> > for instance a sleep in your startup script between the windbind
> > startup and the squid startup.
> >
> > Otherwise perhaps , squid could be configured to run
> > under a 'local' account if this is possible
> > when winbind is being used.
> >
> >
> > M.
>
> _________________________________________________________________
> MSN Messenger: converse com os seus amigos online.
> http://messenger.msn.com.br

-- 
 'Love is truth without any future.
 (M.E. 1997)
Received on Fri Apr 11 2003 - 01:12:30 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:14:56 MST