On Tue, 26 Oct 2004, BusyBoy wrote:
> Is it good to install squid with RAID 0 having following properties:
>
> Striping (RAID 0)
> No Redundancy
> Fastest read/write performance.
> Requires 2 or more disks.
Squid already balances the load on multiple drives.
All you get from striping with Squid is a higher administration cost and
more fatal errors in case a drive should fail as you loose the whole
cache, not only the cache on the failed drive.
Regards
Henrik
Received on Tue Oct 26 2004 - 03:19:09 MDT
This archive was generated by hypermail pre-2.1.9 : Mon Nov 01 2004 - 12:00:02 MST